우리는 전문 제조업체입니다.

강철
Steel provides high strength, toughness, and wear resistance, making it suitable for parts subjected to mechanical loads and long-term use. A wide range of grades allows performance to be matched to specific application needs.
Applications:
Shafts, pins, bushings, structural components, threaded parts, and mechanical fittings.
Grades:
1018, 1045, 1215, 4130, 4140, 4140PH, 4340, mild steel, alloy steel.
Available Finish:
As machined, Black oxide, Electroplating, Passivation, Powder coating, Heat treatment.

스테인리스강
Stainless steel offers excellent corrosion resistance, reliable mechanical strength, and long service life. It is well suited for components operating in humid, chemical, or demanding environments.
Applications:
Precision shafts, connectors, fasteners, housings, fittings, and corrosion-resistant parts.
Grades:
303, 304, 316, 316L, 410, 416, 420, 17-4PH, 15-5.
Available Finish:
As machined, Electroplating, Passivation, Powder coating, Polishing, Brushing, Laser marking.

황동
Brass is valued for its excellent machinability, low friction, and good corrosion resistance. It supports tight dimensional control and delivers a refined surface appearance.
Applications:
Connectors, fittings, valves, bushings, fasteners, and precision components.
Grades:
C230, C260, C360, H62, H65, H90, HA177-2.
Available Finish:
As machined, Polishing, Electroplating, Electroless plating, Nickel plating, Chrome plating, Brushing, Coating.

구리
Copper features outstanding electrical and thermal conductivity along with good corrosion resistance. It is commonly used for parts requiring efficient heat transfer or electrical performance.
Applications:
Electrical terminals, connectors, heat sinks, conductive pins, and custom fittings.
Grades:
C110, C101, C102.
Available Finish:
As machined, Polishing, Electroplating, Electroless plating, Lacquering, Chemical etching.

티타늄
Titanium combines high strength, low weight, and exceptional corrosion resistance. It is suitable for high-performance components with demanding strength-to-weight requirements.
Applications:
Precision shafts, fasteners, structural parts, and lightweight high-strength components.
Grades:
Grade 5 (Ti-6Al-4V).
Available Finish:
As machined, Polishing, Sand Blasting, Tumbling, Anodizing, PVD coating, Painting, Powder coating, Brushing.

ABS
ABS is a versatile engineering plastic with good impact resistance and dimensional stability, making it suitable for functional parts requiring consistent performance.
Applications:
Housings, sleeves, knobs, spacers, functional prototypes, and general plastic components.
Available Finish:
As machined, Sand Blasting, Polishing, Brushing, Laser engraving / marking, Painting, Lacquering / Clear coating.

POM (Delrin / Acetal)
POM offers high stiffness, low friction, and excellent dimensional stability, ideal for precision parts and moving components.
Applications:
Gears, bushings, rollers, sliding components, and precision mechanical parts.
Available Finish:
As machined, Polishing, Sand Blasting, Laser engraving / marking, Texturing.

나일론 (PA6 / PA66)
Nylon provides good strength, toughness, and wear resistance, suitable for parts exposed to repeated motion or mechanical loads.
Applications:
Bushings, bearings, rollers, spacers, and structural plastic components.
Available Finish:
As machined, Sand Blasting, Polishing, Brushing, Laser engraving / marking, Texturing.

PEEK
PEEK is a high-performance thermoplastic with excellent mechanical strength, thermal stability, and chemical resistance for demanding environments.
Applications:
High-performance bushings, seals, precision components, and industrial parts.
Available Finish:
As machined, Polishing, Sand Blasting, Laser engraving / marking, Texturing.

Pc (폴리카보네이트)
PC offers high impact resistance, good dimensional stability, and optional transparency for functional and protective components.
Applications:
Covers, housings, transparent sleeves, and structural plastic parts.
Available Finish:
As machined, Polishing, Sand Blasting, Laser engraving / marking, Painting, Lacquering / Clear coating.

PMMA (아크릴)
PMMA delivers excellent optical clarity and surface quality, suitable for transparent and decorative components.
Applications:
Light covers, display components, transparent tubes, and decorative elements.
Available Finish:
As machined, Polishing, Sand Blasting, Laser engraving / marking, Chemical etching / Etching.

PP (폴리프로필렌)
PP is lightweight with strong chemical and moisture resistance, making it suitable for parts used in fluid-handling and chemical environments.
Applications:
Fluid fittings, chemical components, and lightweight structural parts.
Available Finish:
As machined, Sand Blasting, Laser engraving / marking, Texturing.

PVC
PVC offers good chemical resistance and electrical insulation, suitable for protective and enclosure-type components.
Applications:
Electrical components, sleeves, enclosures, and chemical-resistant parts.
Available Finish:
As machined, Sand Blasting, Laser engraving / marking, Polishing.

PTFE (테프론)
PTFE provides extremely low friction, excellent chemical resistance, and thermal stability for sealing and sliding applications.
Applications:
Seals, bushings, sliding parts, and chemical-processing components.
Available Finish:
As machined, Polishing, Laser engraving / marking, Texturing.

HDPE / UHMW
HDPE and UHMW offer high impact resistance and excellent wear performance, suitable for durable wear and sliding components.
Applications:
Wear pads, guides, rollers, sliding parts, and structural components.
Available Finish:
As machined, Sand Blasting, Laser engraving / marking, Texturing.